What should I do if the alarm is misreported?
To improve the accuracy of our AI detection, we encourage users to report any false alarms. Our technical team will analyze the video to optimize the algorithm for your environment.
How to give feedback:
- Open the specific video clip where the false alarm occurred.
- Click the "..." (More) icon at the bottom of the playback screen.
- Select "Problem feedback" from the menu.
- Choose "AI False Detection" and tap "Agree" to submit.
See the figure below for specific steps:
Note: By uploading the video feedback, you agree that we can use it for problem analysis and user experience improvement. Your privacy is always our priority.
Need further assistance? Contact service@botslab.com
What should I do if network connection fails?
⚡ Quick Reset
Before deep troubleshooting, please restart your router and replug the camera's power supply, then try connecting again.
If the connection still fails, please follow these 4 essential checks:
- Verify the Wi-Fi password is correct.
- Disable router "Anti-Wi-Fi squatter" functions (MAC filtering/Whitelists).
- Note: The camera does not support networks requiring web authentication.
Alternative Connection Guide (AP Method)
Step 1: Power & Reset
Step 2: Connect to Device Hotspot
Step 3: Device Bound Successfully
What should I do if the device is unusable due to power failure during upgrade?
⚠️ CRITICAL REMINDER
Do not power off the device during a firmware upgrade.
If an unexpected power failure has already caused the device to become unresponsive, you can attempt to restore it by manually programming the firmware using the steps below.
Manual Firmware Recovery Guide
Prepare the TF Card: Insert your TF card into a card reader. Check its file system; currently, only FAT32 format supports manual firmware programming.
Copy Firmware: Prepare the firmware file and copy it directly to the root directory of the TF card (do not put it inside any folder).
Insert & Power Off: Insert the TF card into the Botslab Indoor Cam 2 Pro tray. Ensure the power supply is cut off at this stage.
Enter Recovery Mode: Press and hold the Set button (or the configuration hole). Connect the power supply while holding it. Wait for 10 seconds before releasing the button.
Wait for Completion: Wait about 1 minute. If the indicator light becomes steady blue or blinks green, the upgrade is successful.
Final Check: Please do not interrupt the power during this manual upgrade process.
If the device still won't turn on, please contact our support at
service@botslab.com
Share:
Botslab Indoor Camera C221: Network Setup, Notifications & Sharing Permissions Guide
Botslab Video Doorbell R811: Notification Setup, Networking Options & Recording Guide